DalMicro Commercial Technical Information
Natural or synthetic
You can now choose to have your Dalsouple floor made in either standard synthetic SBR rubber, or DalNaturel natural rubber, the eco-friendly alternative. DalNaturel is available in all but the very palest colours in the range. To find out if your choice is available in DalNaturel, just contact us.
Colour availability
We have 80 standard DalColours or your custom colour with no minimum quantity.
Special colours
If you can’t find the colour you want just supply a colour reference for us to match and we’ll send you a sample of your custom colour for approval.
With special colours Dalsouple will achieve the best possible colour match bearing in mind that colours may vary between different materials and that colour appearance will vary based on lighting conditions and angle of view. We do not charge a premium for this service. However, we reserve the right to ship and charge for up to 10% of the order quantity in extra material which result naturally from the special colour manufacturing process. Please contact us for more details.
Colour reproduction
The colours shown on this site are as accurate as possible. However, for an exact colour match we recommend you ask us for a real colour sample before ordering.
Colour variation
Because we make all our products to order, it is essential that all the material required for each installation is ordered in one batch to avoid variation in colour. If you order more than one Dalsouple product in the same colour, for example DalTex and DalUni, due to batch manufacturing it is not possible ot obtain an exact colour match between the two products.
Finish
7 standard DalMicro finishes.
For larger scale finishes please see DalTex.
Tile Size
DalMicro tiles:
1760mm x 680mm.
Petit Carré finish:
610mm x 610mm for access panels.
Martelé finish
340mm x 340mm.
Thickness
DalMicro tiles 2.5mm and 4mm (with eco backing) depending on finish. Please refer to individual pattern swatches for thickness. Special thicknesses are available to order.
Dalsouple recommends a minimum thickness of 2.5mm for flooring use. The thinner the floorcovering, the more visible the subfloor imperfections will be.
Performance
Anti-slip
Anti-static
Noise absorbent
Cigarette burn resistant
Tough
Easy to maintain
Uses
Indoor surfaces and floors,
walls, columns and furniture
Slip resistance
Dalsouple rubber is designed to offer a good degree of slip resistance underfoot in dry conditions. However, it can still be slippy when wet. To minimise the risk of slippage, it is important to use effective entrance matting around all external entrances, and to use signs when cleaning takes place
Special qualities
Available on request: oil and grease resistant, dissipative, electrically conductive, EFT extra flame resistant, low smoke and EFR, outdoor quality, WFR Class 'O' for use on walls on ceilings, MFR marine fire resistant, EUVS (extra UV stabilised). Due to technical limitations, not all colours are available in these qualities.
Standards and certification
Dalsouple tiles meet European standards in all key performance areas. For full details of test results visit Technical Information on this site or email tests@dalsouple.com |
